제품 정보로 건너뛰기
AuxJection LT4 auxiliary fuel injection system with aluminum plate installed on a Camaro ZL1, data-validated for 1130 HP and perfect cylinder distribution.

AuxJection | LT4 스톡 슈퍼차저

$1,800.00 USD
결제 시 배송료 계산됨.

주문 전 필독:

아래 드롭다운 섹션에 중요한 적합성, 튜닝 파일, 설치 및 첫 플래싱 지침이 포함되어 있습니다.

주문하기 전에 모든 제품 정보를 읽어보세요.

커스텀 튜닝 파일 필요 (영업일 기준 1~3일 소요)

미국에서 설계, 제조 및 조립
LT4 DI 시스템이 지원할 수 있는 것보다 더 많은 연료 공급이 필요하지만, 메탄올 분사 방식에 의존하거나 전체 포트 인젝션 시스템에 투자하고 싶지는 않으신가요?

AuxJection  간편하게 설치되고 ECU와 완벽하게 통합되는 깔끔한 순정 스타일 솔루션으로 그 간극을 채워줍니다.
 

작동 원리

AuxJection은 차량의 순정 ECU 내에서 작동하도록 설계된 완전 통합 보조 연료 분사 솔루션으로, 별도의 외부 컨트롤러나 피기백 장치가 필요하지 않습니다. ECU에 기록되는 맞춤형 ECU 소프트웨어(키트에 자세한 설명서 제공)를 사용하여 AuxJection은 순정 컨트롤러에서 기대할 수 있는 것과 동일한 정밀도로 추가 포트형 인젝터를 구동합니다.

AuxJection의 내부 보정 로직은 실시간 ECU 데이터를 사용하여 사용자 지정 직분사 윈도우 지속 시간이 충족될 때 즉석에서 보조 인젝터 펄스 폭을 계산하고 전달합니다. 설치 후 차량은 순정적으로 더 높은 용량의 연료 시스템이 장착된 것과 다름없이 튜닝됩니다.

포함된 연료 라인 세트는 방화벽에서 DI 시스템의 저압 공급 라인을 스로틀 바디 어셈블리를 통해 우회하여 DI 시스템 입구로 다시 연결하므로, 보조 시스템은 순정 하드 라인을 수정하지 않고도 OEM 저압 회로를 공유할 수 있습니다. 플러그 앤 플레이 하네스와 미리 제작된 연료 라인이 결합되어 이 키트는 보조 연료원을 추가하는 데 있어 시장에서 가장 설치하기 쉬운 제품입니다. 

 

호환성:

  • 순정 LT4 슈퍼차저 플랫폼 및 LT1/LT4 Whipple 2.9L/3.0L와만 호환
  • 순정 스로틀 바디 최대 103mm 보어와 호환
  • 슈퍼차저 스나웃에 약 1인치 추가
  • 흡기 방식에 따라 튜브 또는 커플러의 약간의 수정이 필요할 수 있습니다
  • 이 제품은 표준 Roto-Fab 흡기 장착 카마로 ZL1에는 맞지 않습니다
  • Roto-Fab Big Gulp 및 JLT 대형 튜브 흡기는 약간의 수정으로 호환되지만,다른 대형 튜브 흡기의 장착은 보장되지 않습니다
  • 애프터마켓 아이들러 재배치 브래킷 사용 시 벨트와 스로틀 바디 간의 간섭 문제가 발생할 수 있으며, 장착 은 순정 벨트 구동 장치에서만 보장됩니다
  • VP Import, Q16 또는 기타 MTBE 산소 함유 연료와 함께 사용하지 마십시오


플렉스 퓨얼 센서 옵션:

옵션 1:  기존 센서 사용 – AuxJection 하네스, 통합 플렉스 퓨얼 센서 배선 및 필요한 피팅이 포함됩니다. 기존 플렉스 퓨얼 센서를 재사용합니다.

참고: 플렉스 퓨얼 센서는 제품 사진에 표시된 것과 동일한 위치에 장착해야 합니다. 이미 플렉스 퓨얼 키트가 설치된 경우, 라인은 특정 경로 구성에 맞게 설계되므로 적절한 연료 라인 장착을 보장할 수 없습니다. 기존 하드웨어를 제거해야 할 수 있지만 센서는 재사용할 수 있습니다.

옵션 2: 센서 포함 – 완전한 설치를 위해 AuxJection 하네스, 필요한 연료 라인 피팅 및 플렉스 퓨얼 센서가 포함됩니다.

 

중요:

맞춤형 ECU 소프트웨어가 필요합니다. 수정할 현재 튜닝 파일을 저희에게 보내야 합니다. (아래 맞춤형 소프트웨어 | 튜닝 파일 프로세스 드롭다운 참조)
AuxJection은 수정된 파일이 ECU에 기록될 때까지 작동하지 않습니다. *ECU 플래싱 도구는 포함되어 있지 않습니다.

AUXJECTION을 주문하기 전에 아래 드롭다운 메뉴를 읽어보십시오

키트 구성품
  • 빌렛 스로틀 바디 플랜지와 연료 레일 세트(최대 보어 103mm의 순정 스로틀 바디와 호환)
  • (2) FID2200 인젝터 - 유량 매칭 쌍
  • 모든 필수 피팅이 포함된 사전 조립 및 압착 처리된 PTFE AN 연료 라인
  • 플러그 앤 플레이 배선 하네스

설치 가이드 드롭다운에서 아래의 전체 PDF 설명서를 다운로드하세요.

맞춤형 소프트웨어 | 튜닝 파일 프로세스

주문 직후나 키트가 도착하기 전에 튜닝 파일을 보내지 마십시오.

판매용 이메일로 튜닝 파일을 보내지 마십시오. 

AuxJection 키트와 함께 제공되는 아래 지침을 따르십시오.

각 AuxJection 키트에는 키트 ID 번호가 기재된 설명서 카드가 포함되어 있습니다.

다음 단계를 따라 맞춤형 튜닝 파일을 생성하세요:

  1. 이메일: AuxJection@wisherperformance.com
  2. 제목: 차대번호(VIN) _ 키트 ID 번호 [예시: 1G1Y82D47L5000324_#010126_01] *지연을 방지하려면 차대번호와 키트 ID 번호를 모두 포함하세요
  3. 튜닝 파일 첨부: 지원되는 형식: .HPT 또는 .BIN
  4. 작업 소요 기간: 수정된 파일은 영업일 기준 1~3일 이내에 반환됩니다.

파일을 수신한 후: 첫 번째 플래싱 시 반드시 "전체 쓰기(WRITE ENTIRE)"를 수행해야 합니다. 그렇지 않으면 시스템이 작동하지 않습니다.

설치 가이드

카마로 ZL1, 콜벳 Z06, 캐딜락 CTS-V

AuxJection Stock LT4 슈퍼차저 다운로드 가능 PDF

AUXJECTION KIT 유튜브 설치 가이드

C7 Z06 - 마력 애국자들

플렉스 퓨얼(E85) 유튜브 설치 가이드

플렉스 퓨얼 키트(E85) – 2014~2019 코르벳
플렉스 퓨얼 키트(E85) – 2016-2024 카마로 & CTS-V
AuxJection 자주 묻는 질문

AuxJection에 대한 자세한 정보가 필요하신가요? 연료 공급, 지원되는 애플리케이션, 설치, 튜닝 및 설정 요구 사항에 대한 답변을 FAQ에서 확인해 보세요.

전체 AuxJection FAQ 보기 여기

고객 리뷰 | 16 | 5.0
  • 5 stars: 16 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
f
franck Rateau
D
Dusty Wall
Horsepower Goal Achieved: Yes

This system is the most complete and easy to install aux fueling on the market! The system integrates seamlessly with the factory ecu so tuning is a breeze. You tune as normal and pretend the auxjection isn’t there. All of my big HP customers will be getting the Wisher Auxjection! - Blazing High Performance

Really appreciate this, especially coming from someone who has installed and tuned multiple of these systems. Making AuxJection integrate cleanly with the factory ECU and keeping the tuning process straightforward were major priorities from the beginning. Looking forward to seeing it on more of your builds!

N
Nick Speed
What Stood Out: Great customer service and product
Horsepower Goal Achieved: Yes
Vehicle Setup: Kong X Port, upper, lower, NW103, Rotofab Big Gulp, Full exhaust, E70

Total Game changer! Very clean and easy install. I Have installed multiple kits and every one of them gains over 100Whp/100Wtq utilizing AUXJECTION.

Love seeing results like this, especially across multiple installs. Clean installation, consistent gains, and a system that does what it’s supposed to do is exactly what we were after with AuxJection. Appreciate you trusting us with your builds!

A
Anonymous Reviewer
What Stood Out: Customer service was great. Responded very quickly.
Horsepower Goal Achieved: Yes
Vehicle Setup: 2019 Z06 Corvette.

So far so good! The shop owner/car builder was very impressed with the unit. It was his first time installing and tuning an Auxjection unit. The added fuel and the ability to run full E85, the car made about 100hp more with AuxJection over pump 93.

Seeing a 100hp jump on full E85 over pump 93 is awesome! It’s great to hear that it was a smooth first time install and tune for your builder, too. Thanks for highlighting our customer service!

Let us know if you or the shop ever need anything else!

A
ANTHONY R32
What Stood Out: Quick file modification turn around time and a product that works as Intended
Horsepower Goal Achieved: Yes
Vehicle Setup: Cam, Ported Blower, auxjection

Wisher AUXjection works exactly as advertised. I recently used it on a 900 WHP 6th gen Camaro build, and it performed flawlessly. From a tuning standpoint, the integration is seamless no workarounds, no gimmicks, and no headaches. It does exactly what it’s designed to do. Highly recommend it to anyone looking for a reliable auxiliary fueling solution that also cuts down manifold air temps!

Appreciate the killer review, Anthony! A 900 WHP 6th gen is no joke, so hearing that the AuxJection kit integrated seamlessly and kept those manifold temps down is awesome. Glad we could get that file modification back to you quickly, too.

A
Armin Morshed
What Stood Out: Fast shipping and great customer support
Horsepower Goal Achieved: Yes
Vehicle Setup: Kong x port, 9.45 lower with stock upper, dsx aux pump, and fbo

Works fantastic! Easy to tune and the kit is top notch. I like this solution over meth and port injection due to cost factor and reliability. A+ product!

Thanks Armin! We appreciate the feedback and are so glad to hear AuxJection is working well on your setup. Awesome combo!

V
Vic Aguzzi
What Stood Out: timely delivery
Vehicle Setup: ZL1, X-port Kong, 2.30 upper pully, DSX flexfuel, DSX low volume aux pump, long tube headers, 103 Katek throttle body, big gulp roto fab

easy install easy tune Don't know about performance yet

N
Nathan Lamping
What Stood Out: Quick response, quality kit, install looks like OEM.

Install went very smooth, This kit is very nice quality. Caleb is very knowledgeable and also quick to get the flash tune sent over to me after the install. Nothing but great things to say about this setup.

Appreciate you taking the time to leave this! Clean installation and OEM-style integration are exactly what we were going for. Glad Caleb was able to get you taken care of quickly too!

N
Nikolas Vanderleeden
What Stood Out: The flawless integration doesn’t come out looking too far from stock and it just works flawlessly!
Vehicle Setup: 2022 camaro zl1 m6, btr stage 2 blower cam, all supporting mods for everything heads studs, headers, supercharger porting, supercharger cooling mods and auxjection system

The whole kit and install is flawless especially with the right fueling system and supporting mods makes your car an absolute rocket!

Appreciate you taking the time to leave this. Keeping the integration clean and as close to factory as possible was a big priority for us, so we’re glad that stood out. Sounds like a solid setup!

S
Salmons High Performance
What Stood Out: The quality and innovative design.
Horsepower Goal Achieved: Yes
Vehicle Setup: Current customer build is a 2023 Camaro SS, 3

The products from Wisher performance are top notch. I would highly recommend WP for all GM performance tuning and fuel systems.He does all the tuning for the vehicles that I build for my customers.

We appreciate the support and the trust you put in our products with your customer builds. Glad to have AuxJection out there doing exactly what we designed it to do!

D
Dustin Bradford
What Stood Out: Very nice kit
Vehicle Setup: 2019 CTS-V

Worked as advertised. 49 rwhp gain just by swapping to flex fuel.

49 RWHP from the switch to flex fuel is a solid result. Glad the kit did exactly what it was supposed to do. Appreciate you sharing the results!

M
MATTHEW RUSHIN
What Stood Out: Simple, very fast shipping and processing. Caleb has been fantastic on the customer service side.
Vehicle Setup: 2015 C7 Z06, 5" BIG GULP, 103 NW TB, JOKERZ PORTED BLOWER,DSX LID, C&R SLANTED BRICK CONVERSION 2.3 UPPER, FLEX SENSOR, 2" HEADERS, OFF ROAD X PIPE, CORDES EXPANSION TANK, DSX LOW SIDE

I just received my first few kits and was pleasantly surprised! The auxjection plate is O-ring sealed on both sides and mates up to my Jokerz ported snout very nice. No more making a gasket or using RTV to seal the the 103 throttle body to the snout with the oem gasket groove ported away. The wiring harness is oem quality nice, the fuel lines are cleanly put together. I have not installed the kit yet but first impression upon unboxing is impressive and flawless!

Thank you, Matthew! We really appreciate the detailed feedback.

Hearing that the plate design, O-ring sealing, harness quality, fuel lines, shipping, and support all stood out right away means a lot. A lot of thought went into making the kit clean, straightforward, and easy to work with, so we’re glad that came through on first impression.

Awesome setup, and we are glad to have you working with us as an AuxJection dealer. We appreciate you!

R
Ryne Cunningham
What Stood Out: Actually works as intended and described
Horsepower Goal Achieved: Yes
Vehicle Setup: This particular car is a 2024 Zl1 with cam package and supercharger work

Incredible system, works exactly as described

We love hearing that! We appreciate you taking the time to drop us a 5 star review, Ryne!

D
Dylan G.
What Stood Out: The communication back and forth is extraordinary!
Horsepower Goal Achieved: Yes
Vehicle Setup: 2022 Camaro 2SS 3.0 Whipple with supporting mods

Everything was as described, included all needed tools and parts to complete. It is sleek and has an extremely clean look when installed. Wisher Performance is also incredibly easy to communicate with and always timely!

Thank you, Dylan! We really appreciate the detailed feedback and your support. We're glad the kit was clean, complete, and easy to work with. Communication is a big part of what we care about, so it means a lot to hear that stood out.

C
Chase Bilich
What Stood Out: Quality and functionality

AWESOME PRODUCT!!!!!!

Thank you, Chase! We really appreciate the support, not just on the order, but from the very beginning. You were one of the first to take a chance on AuxJection, and that played a big part in helping us get this product moving.

We're glad to hear you're happy with the quality and functionality. That means a lot coming from you.

Thanks again for the continued support and for being a part from the start!

고객 질문
Questions & Answers loading...
중요 정보

제품 면책 고지:

결과는 차량 설정, 튜닝 및 연료 시스템 상태에 따라 달라질 수 있습니다. 적절한 설치와 보정이 필요합니다. Wisher Performance는 부적절한 설치, 연료 공급 부족 또는 잘못된 튜닝으로 인한 손상에 대해 책임을 지지 않습니다.

AuxJection은 호환되는 차량 및 슈퍼차저 애플리케이션용으로 설계된 Wisher Performance 애프터마켓 제품입니다. 제조업체 이름은 장착 및 호환성을 식별하기 위해서만 사용됩니다. AuxJection은 Magnuson Superchargers, General Motors, Chevrolet, Cadillac 또는 관련 제조업체에서 제조, 지지, 승인, 후원하거나 보증하지 않습니다.

⚠️ 캘리포니아주 65호 법안 경고:

이 제품은 캘리포니아주에서 암과 생식 독성을 유발하는 것으로 알려진 화학 물질에 노출될 수 있습니다.

푸터 정책에서 전체 약관을 확인하세요.